The PM8AI/V is a 8 channel voltage input module. The inputs are isolated from the logic and share a common negative terminal.
The standard setting for the PM8AI/V module is 0 - 10V. An input voltage of 0 - 10Volts represents an output of 0 - 4095 and 2 volts would give a reading of 819 +/- 1LSB. To obtain an output value of 0 to 4095 for an input signal of 2 to 10V the offset switch is switched on. An input range of 0(1) to 5Vdc is available by removing the jumper link located on the analogue board inside the enclosure.
SCADA software for people with other jobs!